Straight lines
From our Ambala kiln · Haryana
Terracotta jali in Panipat
Panipat runs on its textile and handloom units, and those buildings get hot. A jali wall on the long sides of a shed lets air cross the floor, and on the office block it cuts glare on the windows.
- 13 designs
- 8 × 8 × 2.5 inch
- Delivery to Panipat
Panipat
Jali bricks for Panipat homes and buildings
For a factory wall, a band of jali near the roof does most of the work. Hot air rises and leaves through the blocks, and the sheet roof does not trap as much heat. Two to four courses of blocks under the eaves is a sensible starting point.
In showrooms on GT Road, white breeze blocks make a good partition between the display floor and the billing counter. The Design 8 ring or the Design 10 pattern gives a clean modern look under shop lighting.
Site tip for Panipat: For long factory walls, ask your engineer about tie bars in the mortar joints every few courses. Jali is not load-bearing and needs a frame or a support at the ends.
Tool · Pattern wall builder
Count jali bricks for your Panipat wall
Pick a design, enter your wall size and joint, and see the pattern, the number of jali bricks and the finished panel size. Every design is an 8 × 8 inch block.
Opal Jali · 14 × 11 blocks · 10 mm joint
162jali bricks to order
- Across × rows
- 14 × 11
- Blocks in wall
- 154
- Finished panel
- 9′ 9″ × 7′ 8″
- Gap to fill, each side
- 1.4″ / 2.0″
The count uses only whole blocks that fit inside your size. Cutting a jali breaks the pattern, so the leftover space is usually filled with mortar, plaster or solid brick at the edges.
Send this wall for a rateOrdering from Panipat
Buying jali bricks for Panipat from the kiln
-
Made by us
The blocks are moulded and fired at our own kiln in Ambala district.
-
See before you buy
Ask for close-up photos and a sample block before you order the full quantity.
-
Planned to whole blocks
Use the builder to size your opening so the mason does not need to cut any jali.
-
Road delivery
We add freight to Panipat to the quote so you see the full cost up front.
Questions
Terracotta jali in Panipat: questions
Something not covered here? Call +91-90411-00702 and speak to the kiln team.
Do you deliver terracotta jali to Panipat?
Yes. Jali blocks go by road from our factory in Village Kakkar Majra, Distt. Ambala to Panipat. Share the site location and quantity and we will include freight in the quote.
Which jali designs suit Panipat?
For the uses we describe on this page, look at the Square Jali, Breeze Block Design 8 and Breeze Block Design 10. For long factory walls, ask your engineer about tie bars in the mortar joints every few courses. Jali is not load-bearing and needs a frame or a support at the ends.
What is the price of terracotta jali in Panipat?
The rate depends on the design, how many blocks you need and the freight to your site. Send these details on WhatsApp at +91 90411 00702 for a quote.
Who lays the jali on site?
Any mason who lays brick can lay jali, in cement and sand mortar. We can talk your mason through stack bond, joint width and how to keep the pattern straight.
Areas we serve
Jali delivery to other cities
The kiln is on the Ambala side, between Chandigarh and Delhi, so the tricity, Haryana, Punjab, Himachal and NCR are all within road reach. Each city page covers how jali gets used there.
Visit the kiln
See the jali blocks at our kiln in Ambala
Come to Kakkar Majra, hold the blocks and lay a few side by side to see the pattern. Or ask us to send photos and a sample of the terracotta jali – panipat to your site.
+91-90411-00702- Village Kakkar Majra, Distt. Ambala, Haryana 134202
- Mon – Sat: 9 AM – 6 PM · Sun: Closed
Book a visit or ask for a sample
