Straight lines
From our Ambala kiln · Tricity
Terracotta jali in Chandigarh
Chandigarh grew up with the brick jali. Walk past the older government houses in Sectors 16, 22 or 27 and you will see perforated brick on stair walls, verandahs and kitchen yards, put there to pull air through the house in May and June.
- 13 designs
- 8 × 8 × 2.5 inch
- Delivery to Chandigarh
Chandigarh
Jali bricks for Chandigarh homes and buildings
Owners rebuilding those houses often want to keep that idea without the grey cement look of a new block. A terracotta jali gives the same open-brick pattern in a colour that matches the exposed brick the city is known for. The stair wall is the most common spot, then the rear courtyard and the terrace parapet.
Some sectors have frame-control rules for the front facade, so check with your architect before changing the street side. The back of the house and the terrace are good places to start, since the rules usually leave more room there.
Site tip for Chandigarh: For a stair wall that faces west, the Square Jali lets in light through narrow slots and keeps the afternoon glare down.
Tool · Pattern wall builder
Count jali bricks for your Chandigarh wall
Pick a design, enter your wall size and joint, and see the pattern, the number of jali bricks and the finished panel size. Every design is an 8 × 8 inch block.
Opal Jali · 14 × 11 blocks · 10 mm joint
162jali bricks to order
- Across × rows
- 14 × 11
- Blocks in wall
- 154
- Finished panel
- 9′ 9″ × 7′ 8″
- Gap to fill, each side
- 1.4″ / 2.0″
The count uses only whole blocks that fit inside your size. Cutting a jali breaks the pattern, so the leftover space is usually filled with mortar, plaster or solid brick at the edges.
Send this wall for a rateOrdering from Chandigarh
Buying jali bricks for Chandigarh from the kiln
-
Made by us
The blocks are moulded and fired at our own kiln in Ambala district.
-
See before you buy
Ask for close-up photos and a sample block before you order the full quantity.
-
Planned to whole blocks
Use the builder to size your opening so the mason does not need to cut any jali.
-
Road delivery
We add freight to Chandigarh to the quote so you see the full cost up front.
Questions
Terracotta jali in Chandigarh: questions
Something not covered here? Call +91-90411-00702 and speak to the kiln team.
Do you deliver terracotta jali to Chandigarh?
Yes. Jali blocks go by road from our factory in Village Kakkar Majra, Distt. Ambala to Chandigarh. Share the site location and quantity and we will include freight in the quote.
Which jali designs suit Chandigarh?
For the uses we describe on this page, look at the Square Jali, Petal Jali and Opal Jali. For a stair wall that faces west, the Square Jali lets in light through narrow slots and keeps the afternoon glare down.
What is the price of terracotta jali in Chandigarh?
The rate depends on the design, how many blocks you need and the freight to your site. Send these details on WhatsApp at +91 90411 00702 for a quote.
Who lays the jali on site?
Any mason who lays brick can lay jali, in cement and sand mortar. We can talk your mason through stack bond, joint width and how to keep the pattern straight.
Areas we serve
Jali delivery to other cities
The kiln is on the Ambala side, between Chandigarh and Delhi, so the tricity, Haryana, Punjab, Himachal and NCR are all within road reach. Each city page covers how jali gets used there.
Visit the kiln
See the jali blocks at our kiln in Ambala
Come to Kakkar Majra, hold the blocks and lay a few side by side to see the pattern. Or ask us to send photos and a sample of the terracotta jali – chandigarh to your site.
+91-90411-00702- Village Kakkar Majra, Distt. Ambala, Haryana 134202
- Mon – Sat: 9 AM – 6 PM · Sun: Closed
Book a visit or ask for a sample
